CATIA

CATIA V5 Fundamentals

Training Course
Duration
5 days

Participant’s Profile
New CATIA V5 Mechanical Designers

Prerequisites
Mechanical design experience
Experience with the Windows operating system

Objectives
This course is designed to provide you with a broad skill set for using CATIA V5. It is a starting point for CATIA, and the knowledge gained is a prerequisite for many more specialised training courses. CATIA V5 Fundamentals should not be viewed as just a basic course as together with the key CATIA skills that are on offer the student will also pick up some very important engineering methodologies.

The course includes a mixture of presentation, tutorial and exercises, enabling students to gain hands-on experience. Course sizes are intentionally kept small, typically 6 students. This allows our trainers to meet the requirements of individual students, while relating course content to work related issues.

The course will cover the following:

Day 1 Day 2 Day 3 Day 4 Day 5
  • Introduction to CATIA V5
  • Sketcher
    • Dimensioning Constraints
  • Creating solids
    • Pads & Sockets Shafts & Grooves Holes Ribs & Slots Lofts

 

 

 

 

 

  • Advanced Sketcher
    • Linking dimensions  Copy geometry Sketch analysis
  • Transformations
    • Rectangular patterns Circular patterns User define patterns Mirror
  • Dress- up Features
    •   Fillets/chamfers Draft/shell   Thickness/threads

 

 

 

  • Advanced Solids 
    • Multi body solids Boolean operations   Part validation Measure Draft analysis 
  • Wireframe geometry
    • Creating planes Creating points Creating lines

 

 

 

 

  • Surfaces
    •   Extrude Revolve  Offset Sweep Fill Loft Blend Trimming Joining
  • Assemblies
    • Manipulation Snap   Constraints

 

 

 

 

 

 

    • Assemblies
      • Design in context Validation Bill of materials
    • Drafting
      • Creating drawing Add views Isometric views Section views   Title block Adding dimensions Adding notes


       

CATIA V5 Advanced

Training Course
Duration
4 days

Participant’s Profile
CATIA V5 Mechanical Design Engineers with a minimum of 6 months use of CATIA V5

Prerequisites
CATIA V5 Fundamentals

Objectives
Building on the Fundamentals course, CATIA V5 Advanced training takes you to the next level. As well as covering the more advanced capabilities of CATIA such as Power Copy, this course continues the development of ‘best practice’ methodologies. Students will be equipped to use the ‘Advanced’ features offered by the Part Design workbench and learn how to make use of component catalogues and how to store and create re-usable parameterised features.

The course includes a mixture of presentation, tutorial and exercises, enabling students to gain hands-on experience. The instructor has an engineering background and can relate to real world examples.

The course will cover the following:

Day 1 Day 2 Day 3 Day 4
  • Use 3D reference Elements to create a part
  • Create advanced sketch-based features
  • Apply advanced dress-up features
  • Modelling using Boolean operations 

 

 

 

 

  • Share designs by working in multi-model environment
  • Analyse parts
  • Annotate parts for review
  • Create and reuse advanced replication tools like Power copies
  • Store components and Power copies into catalogue and reuse them in a new context

 

 

  • Modify CATIA options in order to optimise performance for large, complex designs
  • Manage contextual links between product documents by using publications
  • Create and use parameters to drive a product design

 

 

 

  • Create sections to visualise internal product structure
  • Create scenes and exploded views
  • Generate annotations and bills of material for assembly drawings

 

 

 

 

 

CATIA V5 Surfacing (GSD)

Training Course
Duration
3 days


Participant’s Profile
New CATIA V5 Mechanical Designers

Prerequisites
6 months minimum use of CATIA (CATIA V5 Fundamentals is recommended)
Experience with the Windows operating system

Objectives
This course covers the CATIA Generative Shape Design (GSD) workbenches and includes general tuition in surfacing concepts, quality and methodology. All key functions are covered along with recommended methods for constructing and editing history-based surface models. This course is suitable for a broad range of users, working in areas as diverse as geometry import and repair, tooling design, automotive body-in-white and race car design.

The course includes a mixture of presentation, tutorial and exercises, enabling students to gain hands-on experience. Course sizes are intentionally kept small, typically 6 students. This allows our trainers to meet the requirements of individual students, while relating course content to work related issues.

The course will cover the following:

Day 1 Day 2 Day 3
  • Consolidate basic GSD Principles
  • Quality issues
  • Curve/Surface Analysis
  • Curves on Supports without Supports 
  • Geometrical Set Management
  • Lofted Surfaces (Multisection surface)
  • Swept Surfaces
  • Laws
  • Model Navigation
  • Filleted Surfaces
  • Blend Surfaces
  • Fill Surfaces
  • Healing
  • Additional Useful Commands

CATIA 3D Sheet Metal

Training Course
Duration
2 days

Participant’s Profile
Sheet Metal Part Designers

Prerequisites
Mechanical design experience
Experience with the Windows operating system
CATIA V5 Fundamentals

Objectives
This course covers the basic operation of the Sheet Metal Design workbench. Delegates will learn how to create sheet metal parts starting with a primary wall system and then adding a host of basic and advanced sheet metal features. The course will also cover advanced sheet metal functionality as well as the creation of drawings using sheet metal parts in the drafting workbench.

The course includes a mixture of presentation, tutorial and exercises, enabling students to gain hands-on experience. Course sizes are intentionally kept small, typically 6 students. This allows our trainers to meet the requirements of individual students, while relating course content to work related issues.

The course will cover the following:

Day 1 Day 2
  • Introduction to Generative Sheet Metal Design
  • Defining Sheet Metal Parameters
  • Creating Primary and Secondary Walls
  • Defining Bends
  • Creating Swept Walls
  • Creating Holes, Pockets and Other Standard Features
  • Transformations
  • Creating Stamped Features
  • Managing Folded and Unfolded Views
  • Creating Sheet Metal Drawings

CATIA V5 Lathe

Training Course
Duration
1 day

Participant’s Profile
Manufacturing Users (NC Programmers)

Prerequisites
CATIA V5 Fundamentals
Numerical Control Infrastructure Workbench

Objectives
Upon completion of these courses students will be able to define Lathe Machining operations, in addition to managing Lathe tools and tool assemblies. Students will able be able to understand and use different methodologies for Lathe Machining.

The course includes a mixture of presentation, tutorial and exercises, enabling students to gain hands-on experience. Course sizes are intentionally kept small, allowing our trainers to meet the requirements of individual students, while relating course content to work related issues.

The course covers the following topics:
  • Introduction to Lathe Machining
  • Lathe Operations
  • Rough Turning Operation
  • Groove Turning Operation
  • Recess Turning Operation
  • Groove Finish Turning Operation
  • Profile Finish Turning Operation
  • Thread Turning Operation
  • Sequential Turning Operation
  • Ramp Rough Turning Operation
  • Ramp Recess Turning Operation
  • Tools and Tool Assemblies Management
  • Methodologies for Lathe Machining

CATIA V5 Manufacturing (Up to 5 axis prismatic)

Training Course
Duration
5 days

Participant’s Profile
Manufacturing Users (NC Programmers)

Prerequisites
CATIA V5 Fundamentals

Objectives
At the end of this course, participants will be able to use the common platform for 2.5 to 3-axis machining capabilities for products NCG & PMG. The course includes a mixture of presentation, tutorial and exercises, enabling students to gain hands-on experience. Course sizes are intentionally kept small, typically 6 students. This allows our trainers to meet the requirements of individual students, while relating course content to work related issues.

The course is split into four parts:

Part 1: Numerical Control Infrastructure Part 2: Surface Machining
  • Identify & use the tools specific to Manufacturing workbenches
  • Create a manufacturing program and simulate it
  • Manage tools and tool catalogues
  • Define and verify the tool path
  • Generate NC data using an integrated post processor
  • Create shop floor documentation
  •  Manage design changes
  •  Import V4 data
  • Identify and use the Surface Machining workbench tools
  • Define3-Axis Surface Machining operations
  • Create Probing Operations
  • Create a Machining Area before performing the operations
  • Define a Rework Area
  • Analyse and modify the Tool Path
Part 3: Prismatic Machining Part 4: Multi- Axis Machining
  • Identify and use the Prismatic Machining Workbench tools
  • Define Prismatic Machining Operations (2.5 Axis Milling) in CATIA V5
  • Create Prismatic Machining Area and Rework Area
  • Define and Modify NC Macros
  • Identify & use multi-axis surface machining workbench tools
  • Define 5-axis machining operations such as: multi-axis sweeping, multi-axis contour driven, multi-axis curve machining, multi-axis isoperimetric machining, multi-axis drilling and multi-axis tube machining

Contact Us

Invalid Input

Invalid Input

Invalid Input

Invalid Input

Copyright © 2020. All Rights Reserved. Designed by Web Partner